| By
fully integrating high-performance RAID controllers, software,
and automatic environmental monitoring, the ProFibre Storage
Array helps reduce your total cost of ownership. Advanced
scalability features provide investment protection. As your
storage requirements grow, you can easily interconnect ProFibre
Storage Arrays to form extremely large storage systems.
The
ProFibre DF1100R is a 10-drive bay, uses 19-inch rack mounting,
which increases flexibility and enables the use of a wide range
of industry-standard disk drives. The ProFibre DF1100R
helps ensure reliability by utilizing fully redundant,
hot-swappable active/active controllers, drives, and power and
cooling components. RAID levels 0, 1, 3, 5, and 0+1 and disk
drive capacities 9GB, 18GB, 36GB, and 73GB are supported. You
can also leverage host clustering support, which provides a
maximum level of data protection.
| RAID
characteristics |
Model
DL1100R |
Model
DF1100R |
| Processor |
Intel**
i960RN |
233
MHz Strong Arm RISC |
| Logical
arrays 3 |
Up
to 40 drives into 8 LUNs |
Up
to 80 drives into 16 LUNs |
| Hardware
XOR |
Yes |
Yes |
| Processor
memory with parity protection |
32
MB |
32
MB |
| Data
cache |
64
MB |
64,
128, 256 2, 512 MB 2 |
| Flash
memory |
1
MB |
2
MB |
| ECC
memory support |
Yes |
Yes |
| General
characteristics |
| Form
factor |
19"
rack mount by 3U high |
| Number
of disk drive bays |
10 |
| Disk
drive capacities |
9,
18, 36, 73 1 GB |
| Maximum
Storage capacity |
730
GB 1 per enclosure |
| Model
DL1100R connectivity (per controller card) and DL1100J |
| Host
channels |
Two
copper FC-AL using HSSDC connectors |
| Drive
channels |
Four 4 Ultra2 SCSI LVD at 80 MB/sec per bus.
External connection via 8 mm 68 pin SCSI LVD connectors. |
| SCSI
bus termination |
Automatic |
| Device
support |
SCSI-1,
SCSI-2, Ultra, and Ultra2 SCSI devices |
| Model
DF1100R connectivity (per controller card) and DF1100J |
| Host
channels |
One
copper FC-AL supporting two target IDs using a single
HSSDC connector |
| Drive
channels |
Two
fibre at 100 MB/sec per channel. External connection via
HSSDC connector. |
| Operating/power
specifications |
| Temperature |
10
to 40° C; 8% to 80% non-condensing humidity |
| Max
wet bulb |
27°
C |
| AC
power per single enclosure |
90
to 260 VAC (47 to 63 Hz line frequency), 415 W at max
avg |
| Certification |
FCC
Class A, CSA950/UL1950, EN60950, IEC60950 |
| Dimensions |
| Rack-mounted
unit |
126
mm H x 444 mm W x 546 mm D
(5.0 in H x 17.5 in W x 21.5 in D) |
| Deskside
unit |
529
mm H x 281 mm W x 594 mm D
(20.8 in H x 11.1 in W x 23.4 in D) |
| Host
attachment support |
| QLogic
HBAs; Vixel hubs |
| Operating
systems support |
Windows
NT/E 4 with Service Pack 6 or higher
and Windows 2000 (DF1100R only) |
1 73 GB fibre drives only
2 DF1100R only
3 With drive expansion
enclosures
4 Two drive channels for
DL1100J |
|
Product
Highlights
- Powerful
233MHz RISC processor
- System
scalability up to 80 drives and up to 5.8TB per system
- Two
fibre drive channels at 100MB/s per channel
- One
copper FC-AL host channel with 1Gb/s host data rate
- Transparent
failover/failback for clustered operating systems to help
maximize data protection
- Mirrored
data cache up to 512MB
- Helps
ensure high availability by using redundant, hot-swappable
components
- Uses
advanced enclosure technology to minimize vibration and
maximize drive performance
- Supports
transparent failover for clustered operating systems to help
maximize data protection
- Scales
from 9 GB to 5.8 1 TB per system (DF1100R)
- Simplifies
interconnectivity to enable very large storage capacities
Integrates RAID controllers to manage site-wide or
enterprise Windows-based solutions
|
